【Specification】:
Phoenix goods Urethane Bandsaw Tires 9" x 1/2" x .095"
【Fit】:
Black & Decker : BDBS100, BS700
Craftsman : 137.21409, 113.24458, 315.214770, 315-214590
Delta : 28-150, BS100, SM400
Grizzly : G1052
ProTech: 3203
Ryobi : BS 101, BS901
Shopfox : W1749, W1750, T20837
Fits certain models of Tradesman, Skil and Delta as well

【Package Includes】:
2 Pack 9 inch x 1/2 inch x .095 inch Urethane Band Saw Tire

【Note】:
Easy to install and remove. It is recommended to soak in hot water before installation to make the material more flexible.
When installing, please stretch the tire to fit the wheel tightly.
Replacing this tire increases the efficiency and effectiveness of the band saw while keeping it running smoothly and safely. Features a sturdy and impact-resistant profile for optimum durability.

Use:
1.Make sure to unplug your band saw whilst changing any parts or servicing it.

2.Urethane band saw tires don't require adhesive, but they do need to be stretched on.

3.Remove the old tires, and clean the machine of any dirt, debris, or adhesive.

4.The smaller tires can be fitted by stretching them on by hand.

5.If you can't get the tires on by hand stretching them, clamp the tires to the wheel. Work the tire around the wheel in both directions and add clamps as you go.

6.A dowel rod or smooth tool can be used to pry the tire on.

7.Once the tire is securely on the wheel, the stretch will need to be smoothed out.

8.With a dowel between the tire and the wheel, roll it around the entire wheel.