Introducing the new XT XTENDER Fence Platform from BOW Products. The XT XTENDER transforms your saw by extending the table surface in seconds. The 24-inch, 36-inch, or 46-inch fence quickly attaches to the current fence of your table saw, portable saw, contractor saw, band saw cabinet saw, or router table, giving you increased feed support and control during cuts. The XTENDER Fence is 5 inches tall, which also provides greater control when working with taller material. Versatility is key with the XTENDER Fence, which is why it can also be set up in multiple positions for different uses. You can position the fence forward relative to the current fence for greater control during infeed. Positioning the fence in the back allows for more control on the workpiece during outfeed. Finally, Centering the XTENDER Fence allows for a balanced, even distribution of control. Along the face, top and back of the XTENDER Fence you will find multiple T-slots that can be used for accessories such as featherboards. The T-slots accept 5/16-inch and 1/4-inch t-bolts. There is also a special mounting slot that's compatible with Delta UniFence and Harvey Fences. Standoffs on the bottom of the XTENDER Fence not only protect the table surface but also allow the XTENDER to glide smoothly across it. The XTENDER Fence includes a built-in storage through hole so it can easily hang on a wall. This saves valuable space in your workshop and around your tools and equipment. To reap the full value of the XT XTENDER Fence, it's recommended to pair it with a set of XT Feed Supports and T-Track Clamps from BOW Products. The Feed Supports attach to the XTENDER and provide an extension to your tabletop on either side. The Feed Supports are designed to automatically match the height of our table and have beveled edges to easily accept material fed through the saw. The T-Track Clamps can work with all types of fences. They fit all the way down in the milled slots for a firm grip and no slippage.