⭐Diameter: 2.5 inch, Thickness: 0.1 inch. Please measure your saws recess to ensure proper fit
⭐They fit Delta, Rockwell, some Jet, Ridgid, Grizzly, and other imports.
⭐Make sure your insert recess has the locating pin on the side, not on the rear.
⭐IMPORTANT INSTALLATION NOTE: First make sure the lip of the hole is free from dirt. If a table alignment pin,is not tight or missing,often the blade mounting slot will close up some over time which reduces the insert hole diameter slightly. I tap a flat head screw driver into the blade installation slot a bit to wedge it open. That should spread the insert hole enough for it to fit
Description
use on 14" Band Saws and 24" Scroll Saws.2&1/2" X .100 thick Please measure your saws recess to ensure proper fit. They fit Delta, Rockwell, some Jet, Ridgid, Grizzly, and other imports.
Thaekuns 2 piece Router Collet Kit 42999 1/4" and 42950 1/2" Fits for PORTER CABLE models
KWD 9
Thaekuns 48-66-1015 1/4-Inch Router Collet for Mmilwaukeee routers series 5615, 5616, 5619, and 5625
KWD 8.500
Thaekuns 2pcs 877-330 Top Cover for Hitachi NR83A, NR83A2, NR83A5, NR83AA, NR83AA2, NR83AA3, NR83AA5, NV65AC, NV83A, NV83AA, NV83A2, NV83A3, NV83A5
KWD 4
Thaekuns AB-9051116 Pressure Reducer for Stanley Bostitch Air Compressor
KWD 3.500
