Specifications:
Condition: 100% Brand New
Colour: Black
Vision: Use the Chip Sensor and Lens of 360 System
Camera Type: Handle Camera
Image Sensor: 1/3" CCD Color Camera Starlight Night Vision
Detection Angle:135°(H), 170°(D),97°(V)
Placement on Vehicle: Rear
Fitment Type: Direct Replacement
Power Supply: DC 12V
Working Tem. ：-30℃-80℃
Effective Pixels：1280*960 pixels
Output Resolution:(HD)1280*720,(CVBS)1280*480
Image Frame Rate:(HD)25/30fps,(CVBS)50/60fps
Video Standard:AHD/CVBS
Working Current: 5V:96mA
Minimum Illumination:0.0001Lux/1.2F
Sensitivity: 4500mA/Lux-sec
Signal-to-noise ratio:38dB
Lens:1/3 6Glass Lens
Marine/Waterproof, Night Vision, Distance Line
Note: PAL/NTSC are optional, NTSC is in default and PAL provide per your request
Most monitor is suitable for both PAL and NTSC
this product does not include keyhole covers.

INSTALLATION PROCESS:
Test the equipment first. Before you do anything else, first make sure that everything is okay and working as they should.Connect the camera to the monitor and check that they work. If everything is okay, then move on to step two.
Install this backup camera. This step requires that you carefully remove the tailgate handle before replacing it. install the new handle with the camera and screw it into place.
Run cable.. The trigger wire goes to the backup light circuit, while the video cable connects on the monitor. You'll need to unscrew and open up your rear lights for this. Also, with the tailgate open and lying flat, you can see a hole to pass the cable from the tailgate into the truck bed and then further along the side, to the cabin
Connect all cables. Connect all the cables together and run a last check to make sure everything is properly fitted.
Test. Now just start up your truck, move into reverse, and your mirror monitor should light up.