Search

3 Buttons Keyless Entry Remote Control Car Key Fob for 2003-2006 Chevy Tahoe , Avalanche , Silverado , Suburban / Cadillac Escalade / GMC Sierra , Yukon (FCCID: LHJ011) 315MHz 2 Pack

KWD 6.500
KWD 8

Brand
KeyRunner
Weight
28 g
1 +

Special Features

  • ✔️COMPATIBILITY VEHICLE: New keyless entry remote control car Key fob fits 2003-2006 Chevy Tahoe , 2003-2006 Chevy Avalanche , 2003-2006 Chevy Silverado , 2003-2006 Chevy Suburban , 2003-2006 Cadillac Escalade , 2003-2006 GMC Sierra , 2003-2006 GMC Yukon , 2003-2007 H ummer H2.
  • ✔️REFERENCE NUMBER: FCC ID:ID:LHJ011 315MHz Compatible with Part Numbers: 13584498, 13529650.
  • ✔️COMPATIBILITY: Please use the compatibility filter on the top left corner to double-check if these will work for your car, by clicking "Enter a New Vehicle.
  • ✔️PRE-TESTED: Each key remote replacement comes with a complete electronic assembly with a battery, and a fully tested complete uncut ignition key with a keyless entry remote.
  • ✔️SERVICE: If you have any questions about the product, please contact us in time and we will resolve your questions in time.

Description

Product Description:
Specification:
FCC ID:LHJ011
Part Number: # 21997127, 15132197 #1, 15132198 #2, 10377295, 22730827, 15186203, 15186200 #1, 15186201 #2.
Type:3 Button Remote
Frequency:315 Mhz
Compatible Vehicles:
2003-2006 Cadillac Escalade
2003-2006 Chevy Tahoe
2003-2006 Chevy Avalanche
2003-2006 Chevy Silverado
2003-2006 Chevy Suburban
2007 Chevy Silverado Classic Body Style
2003-2006 GMC Sierra
2003-2006 GMC Yukon
2003-2007 H ummer H2
Programming :
Press each button on the remote 26 times (lock x 26, unlock x 26, horn x26) then attempt the steps outlined below
1. Close all doors on the vehicle.
2. Then insert key into the ignition.
3. Press and hold the power UNLOCK button on driver's side door panel. Do not release until instructed to do so in step 5.
4. Quickly turn the ignition ON, OFF, ON, OFF. (ON is the position just before of starting your vehicle, OFF is the position
whereyou can pull your key out of the ignition)
5. Release the power unlock button on the driver's side door panel. The vehicle should respond by locking and unlocking automatically.
6. Hold the LOCK and UNLOCK buttons on the remote at the same time until door locks cycle again. This could take up to 30 seconds.
7. NOW repeat step 6. for all additional remotes including working ones.
8. TURN ignition to ON to exit programming mode.
9. Turn ignition OFF, remove key and test all remotes to make sure that they are all properly programmed.
Package Content:
2 x Remote car key

Related Items


{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}