Self-Programmable Remote Car Key Fob Replacement
Compatible with:
Fit For Nissan:
2003-2009 350Z
2002-2006 Altim
2002-2006 Maxima
2003-2007 Murano
2004-2009 Quest
2004-2015 Armada
2007-2017 Sentra
2007-2015 Versa
2009-2011 Pathfinder

Fit For Infiniti:
2003-2009 FX35
2003-2008 FX45
2003-2006 G35
2002-2004 I35
2003-2007 QX56
2008-2011 EX35
*Will not work if you have N issan Intelligent Key (also known as smart key, proximity system, push button ignition)

How to Program your Car Key Fob Replacement:
1. Close and lock all doors with the driver's side power lock switch located on drivers door panel.
2. Insert key into ignition (DON'T TURN) and remove it from the ignition key cylinder at least 6 times within 10 seconds
(this will need to be done at approximately one second intervals). You may need to insert and remove the key up to 10 or
12 times until your hazard lamps flash. PLEASE NOTE: Withdraw key completely from ignition cylinder each time. If this
procedure is performed too fast or too slow the system will not enter programming mode.
3. Insert key into ignition and turn to the ACC position.
4. Within 5 seconds, push the LOCK button on the keyless remote. Your hazard lamps will flash. PLEASE NOTE: Do not
press the button on the remote more than one time or the programming will not be successful.
5. If there are any remaining remotes (including working ones), Unlock then Lock all doors using the switch on drivers door
panel. Within 5 seconds of locking and unlocking doors press LOCK button on the next remote. Your hazard lamps will flash.
Repeat this step for each remote (including any working remotes).
6. When all remotes have been programmed turn the key to the OFF position, remove keys from the ignition, unlock doors using
the driver's side power lock/unlock switch and open the driver side door.