Spec:
Item Type: 35kg Coreless Motor Servo
Weight: Approx.85g / 3.0oz
Shell Material: Aluminum Alloy
Gear Material: Stainless Steel
Color: Blue
Steering Gear Size: Approx.40 x 20 x 41mm / 1.57 x 0.8 x 1.61in
Working Voltage: DC 6V-8.4V
Dead Zones: 2?s
Operating Frequency: 50-333Hz
Speed (6V): 0.13s/60°
Speed (7.4V): 0.12s/60°
Speed (8.4V): 0.11s/60°
Locked Rotor Torsion (6V) : 29kg/cm
Locked Rotor Torsion (7.4V): 22kg/cm
Locked Rotor Torsion (8.4V): 35kg/cm
Plug: JR.
Applicability: Fit For 1/8, 1/10, 1/12 Remote Control Vehicles

How to Use:
Installation instructions:1. First install the steering gear to the steering gear base, do not install the steering gear arm or steering gear . Just attach the steering gear to carframe. Then connect the steering gear to the receiver, usually CH1 or ST socket.2. After the steering gear is fixed, open the remote control, and turn on the electric adjustment after the setting, and then the steering gear will stop in a fixed position.3. Install the steering gear or arm to the output gear without turning off the remote control and steering gear.

packing list:
1 x Steering Gear
5 x Plastic Steering Arm
4 x Screw Barrel
4 x Rubber Mat
1 x Metal Steering Arm
7 x Screw