Search

Search

BETAFPV ExpressLRS OpenTX Mini Nano Receiver High Refresh Rate Long Range Performance for FPV Racing Drone

KWD 8
Brand
BETAFPV
Weight
12 g
Size2.4G
– 1 +

Special Features

  • 【ExpressLRS】 ExpressLRS is an open-source RC link for RC applications, based on Semtech Lora SX127x or SX1280 hardware for RX and TX respectively. This makes ExpressLRS one of the fastest RC links available while still offering long-range performance.
  • 【ExpressLRS Receiver】BETAFPV Nano receiver is based on the ExpressLRS project, an open-source RC link for RC applications which aims to achieve the best possible link performance in both speeds, latency, and range suit for ELRS TX module or Nano bay, etc.
  • 【Crossfire Serial Protocol 】ExpressLRS uses the Crossfire serial protocol (AKA CRSF protocol) to communicate between the receiver and the flight controller board. So make sure your flight controller board supports the CRSF serial protocol. How to set up the CRSF protocol can be viewed on the fourth page of the manual.
  • 【Nano Size】This receiver only has 0.7 grams and the volume is 12mm*19mm which is very suitable for Tiny whoop because of the ultra light and Nano size.
  • 【Configuration & Bind】 Nano receiver could enter binding status by power on/off three times. Step: Plugin and unplug nano receiver three times; Make sure the LED is doing a quick double blink, which indicates the receiver is in bind mode; Make sure the RF TX module or radio transmitter enter binding status, which sends out a binding pulse; If the receiver has a solid light, it's bound.

Description

ExpressLRS Nano TX Module supports 500Hz refresh rate； Short press the button on the Nano module 3 times to get into the binding status. We suggest our customers upgrade their modules and receivers' ELRS version to 1.0.0. Significantly, the module and receiver have to be in the same ELRS version, otherwise, the frequency cannot match successfully.

Note: The firmware version of the Nano receiver and module manufactured by our company is ELRS 1.0.0-RC5 (the fifth test version before release); The ELRS Innovative team has officially released version 1.0.0. Based on the version, we have some updates:
Specification

● Weight: 0.7g (receiver only)
● Size: 12mm*19mm
● Telemetry power: 20dbm
● Frequency bands (Nano receiver 915M/868M version): 915M FCC/868M EU
● Input voltage: 5V
● Antenna connector: IPEX MHF

Package
● 1 * BETAFPV ELRS Nano receiver
● 1 * BETAFPV T antenna
● 2 * Spare shrink tube
● 4 * 30awg silicon connection wires (1 black, 1 red, 1 white, 1 yellow)
● 1 * pin header 1x4
● 1 * Nano receiver user manual

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}