Product Details:
Non-Slip Base
The bottom of the soap cutter has non-slip rubber beads to keep the soap cutter balanced and prevent scratches on the desktop.
Clear Tick Marks（both inches and centimeters）
Easy to read the numbers on the tick marks when cutting. The scale contains inches and centimeters.
High-Quality Steel Wire
Made of Premium steel wire, with good toughness, smooth cutting and not easy to break. In addition, the set comes with 10 replaceable wires.

EASY TO INSTALL
STEP1: Put the end of the wood knife bow into the mounting bracket of the base and align the screw holes. Then put the cap nut into the nut hole, screw the long bolt through the hole into the nut at the other end, and tighten the bolt with the wrench supplied.
STEP2:Turn the wire adjustment knob to adjust the wire to a proper state, but not too tight to avoid breaking the wire.
STEP3: Refer to the scale on the scale table to adjust the size adjuster to the required size and tighten the screws.

NOTE
Kindly Note: this soap cutter is designed for cutting pre-cured soap, not fully cured hardened soap.
Kindly Note: the bolt should not be tightened too tightly or too loosely, so that the knife bow can cut flexibly. Please align the bow so that wire can align with the notch on the base.
Kindly Note: This step requires tools such as pliers, please wear gloves to avoid injury.
Kindly Note: Wipe the soap dispenser with a towel after use and store it in a dry and ventilated place.
Package included:
1x wood soap cutter
10x stainless steel replace wire
1x adjusting tool