350kg High Torque RC Servo, 16V24V High Voltage Full Metal Gear Digital Servo (Control Angle 360)

High Torque Servo: 16V-24V (Rate 18V). Speed ( 18v): 0.24s/60°. Max Torque: 550kg.cm ; Rated torque: 180kg.cm ; Angle range: 0-360° ; Input signal: PWM: 50us ~ 2200us, 50-400Hz.
High Quality Servo: Magnetic encoder feedback, high repeatability; High hardness steel planetary gear transmission, High durability; Overcurrent protect; jam protection; could double-shaft positioning: one is the driving shaft, one is the assistant shaft.
Servo Size: L：143mm; W：66mm; H：58m. Weight:600g.Product included: 550kg Servo*1, Accessories: big Bracket *2,small Bracket *2,cable*1
Widely Use Servo: You can use like normal Servo or motor, DIY an advanced robot, robotic arms, PTZ cameras, Remote control vehicle, and other mechanical projects. At Motor Mode, you can use like wheel-drive, or DC motor. It can perfectly compatible with for Futaba, for JR, for SANWA, for Hitec and other remote systems and Arduino PCB
Two modes: servo position and motor drive, which is selected by a DIP switch. In servo mode the shaft rotation can move 0-360 degrees for 0.5 to 2.5 uSec pulse width. There are gain and offset potentiometers to calibrate the motion over any standard servo range. There is also a reversing DIP switch to change the sense of the rotation.
NOTE! As this is a high-power servo, so a high-power power supply (16-24V, 25A) is required, We recommend using 20V battery.

Docyke 550kg

Hello,