Common Usage Problems and Solutions(Must See)

Cannot Fire or Beads Fall Out
1. The water beads should be soaked in a large enough container and filled with enough water to soak for a long enough time. If it does not expand enough, it may not fire or the water beads may fall out of the front end.
2. Must empty the drum after use, the water beads will shrink and become smaller resulting in the subsequent can not be used or stuck

The Launcher is Stuck
If this product is not equipped with a battery, firing water beads will cause no power and jam. Therefore, the water beads can be fired only after the battery is installed and the switch is turned on.

Short Range, Weak Power
Make sure the power is sufficient. Transport and storage can lead to low power, so if you experience a lack of power and a short range, you just need to fill the battery up.

Abnormal Electric Launcher
Please install the battery according to the instruction. The abnormal or inoperative motor drive is mostly caused by the battery voltage, it is recommended to use a battery with stable voltage.