2 Channels 2.4Ghz Remote Control Cessna Airplane .
WARNING: Please always use corresponding adapter ( 0.5-1A) to connect USB cable to charge the robot ( USB Cable tech data: Input: 5V 0.5-1A Output: DC4.2V - 350mA )
Pay attention to insert the socket while connecting the motor wires with PCB board. Please always insert using "WHITE" with "WHITE" color and "RED" with "RED" color.
Note: Airplane need be assembled Kits from Unbox. Pilot need to complete last procedures for making own Cessna RC plane by following up our steps in instruction manual.
Hope you will enjoy to building your sky dream.

Specification:
Material: EPP foam
Wingspan: 380mm
Length: 335mm
Motor: Coreless 716A
Battery: 3.7V 300mAh Lipo battery
Taking off Weight: 50g
Flying Time: 12mins
Charging Time: about 40mins
Remote Control: 2.4Ghz
Radio control Range: 80m

Features:
move forward, up/down, turn left/right
EPP foam, light weight and durable.
Smoothly body design, Kits simple assembling procedure enable you to build your own airplane.
Efficiency 716A coreless motor support your plane lasting a long time flight.
Thanks to 3-axis gyroscope system, which have this airplane flights more stable and easy, suitable for beginners.

Includes:
1 x Half-assembled plane
1 x transmitter
2 x 1S Lipo battery
1 x USB cable
3set x Spare Propellers

2 x landing gear

Remind:
Transmitter requires AA battery (Not included)
Please Install the propeller slowly and gently by hand.
Please don't fly the RC plane when the wing speed is more than 5 meters per second.

Please face the wing coming direction when you start fly plane.
Please read the manual or check the sticker on the gift box, watch the video from link before assembling.