How to Use:
Setting method:
Use a toggle switch to set the operating mode. The uppermost left is F/B/R, the middle is F/R, and the rightmost upper is F/B. Push the switch to the corresponding position to complete the setting.

Specification:
Item Type: Electronic Speed Controller
Material: Plastic
Color: Black
Forward: Continuous Current/Peak Current 40A/160A
Reverse Direction: Continuous Current/Peak Current 20A/80A
Support Voltage Range: 2-3 Lithium Batteries (Lipo)
Support: Number of Engines/Ton
2 Lithium Batteries : 280, 370 or 380 Size Motor RPM is Lower Than 30000 at 7.2V
3 Lithium Batteries : 280, 370 or 380 Size Motor RPM is Lower Than 20000 at 7.2V
BEC Output: 2A / 6V (Switching Regulator Mode)
Operating Mode: One Way / Two Way / Climbing
Applicable Models: For1/16, for 1/18, for Electric House/Denyue/Trolley: Electric House, Denyue, Short Truck, Trolley, Truck, Climbing Car, Tank.
Suitable: For WPL, for C24, for C34, for MN, for D90, for MN99S, for MN86s, for G500 RC Car Upgrade Parts

Package List:
1 x Electronic Speed Controller
1 x User Manual

Note:
1. Due to manual measurement, please allow an deviation of 1‑3mm.
2. The monitor calibration is inconsistent, and the color of the item shown in the photo may be slightly different from the actual object.
3. After the setting is completed, shut down and restart the ESC.
4. This product does not have the ESC reverse connection function. If the power supply is reversed, it may instantly cause irreversible damage to the ESC and the battery. Please pay special attention to the polarity of the battery when using it.
5. If the motor rotates incorrectly, please change the two motor wires. The motor wires are not divided into positive and negative poles.