Feature:
1. Low Heat Generation: The motor will adjust the current in real time according to the actual load to reduce heat generation, so as to play a greater energy conversion in a compact space, energy saving and efficient.
2. High Torsion: The high speed performance of the hybrid servo drive system is more than 30% higher than that of open loop stepper motors, and the effective torsion is increased to more than 70% of the holding torsion.
3. Noise Reduction: With feedback encoder based space current control algorithms and smoothing filtering technology, this motor is highly resistant to the low frequency resonance that plagues conventional stepper motors.
4. Multiple Advantages: The hybrid servo system has almost real time synchronization between the position response output and the input command , and the high torsion output makes the system have high speed dynamic response.
5. 2 in 1 Installation: The motor and driver are integrated, eliminating complex wiring and increasing the motor's installation space.

How to Use:
Connected to the automation control system and can be used

Specification:

Item Type: Integrated Closed Loop Motor
Material: Aluminum alloy
Torsion: 1.2N.m
Shaft Diameter: Approx. 8mm / 0.31in
Drive parameters Minimum Typical value Maximum value Unit Input voltage 20VDC 24VDC 48VDC V Output current 0 3 4.2 A Step frequency 0 - 200K Hz Control input current 7 10 16 mA Overvoltage protection - 55 - VDC Input voltage - 5 - VDC Insulation resistance 100 M?

Package List:
1 x Integrated Closed Loop Motor