✪12AWG XT60i female cable fit for most 250 size quadcopter and most RC cars and trucks.
✪ High Quality: High Quality Female XT60i Connectors with 50mm 12AWG Soft Silicone Wire Cable. The conducters are made of many fine strands, and with the silicone jacket it's quite flexible and helps with strain relief at the point-of-use. And added protection of the heat shrink under the connectors. Recommend this wire for use with 150C-250C burst rate batteries.
✪Easy to install: The XT60i pigtail wire ends are pre-tinned if you intend to solder these, but if you prefer wire nuts or fast connectors, they're 12AWG standard wire, so you have plenty of options.
✪XT60i Connector : XT60I-F is based on XT60H plus another data signal pin, Used to detect such as battery temperature signal or 1S voltage signal, widely used in intelligent battery management,to extend the life of the battery.
✪Note:The 12 AWG wire is only rated for 25 amps. The 12 AWG wire is only rated for 25 amps. If you use these connectors, you need a fuse to protect the wire should you exceed 25 amps. If your battery needs to supply more than 25 amps, find connectors with wires rated for your current draw.
Description
GELRHONR XT60i Female Connector with 12AWG Silicon Wire for RC car, quadcopter and boat battery,Electric bikes
The XT60i connectors here come with a 30cm length of wire leads allowing non soldering solution to matching up battery to motor controller connections.
It is durable and the grip on each other is very firm.
Color: Red/Black
Material: Soft Silicone +copper core
Copper contact. Low resistance
Wire number: 12AWG
Max Current: 25A
200°C heat resistance
Length: 50mm/1.9in
Connector : XT60i Female
Packing list:
2*XT60I-F Pigtail Wire