Polydoh is a Nylon-like plastic that becomes moldable in 140°F and can be shaped by hand.
Once set, it is extremely strong - so if you're fixing something with it, it will last forever.
Plastic can be melted over and over again.

Directions of use:
1. Prepare a container for polydoh - this can be a mug, a bowl, etc.
2. Add granules into container
3. Pour boiling water into container 4. Wait for the granules to melt (this takes approximately 30-60 seconds)
5. Carefully remove from hot water, drain, and squeeze out water trapped in between the granules
6. Start molding!