The package includes:
1 x UV Resin (net weight: 250 grams)
NOTE:
Due to the anaerobic nature of the product, in order to ensure a long storage time, the bottle is generally not full, which can also prevent it from being pressed and leaked during the delivery process. But we will guarantee that the net product weight is correct upon delivery.

Instructions:
1. Directly pour the resin in the mold or bezel.
2. Add colorants, glitter, dried flowers or anything you want in the resin using a toothpick or tweezers.
3. Cure both front and back sides of the resin with UV lamp or sunlight.
4. After curing, leave the resin to cool down for a few minutes instead of touching it inmediately with your hands.
Tips: It would be better to cure the resin in layers of 3-5mm each time instead of curing it all in once, if large amount of resin is needed for the project.

How to avoid bubbles:
1. Before using the resin, place the bottle upside down for a few minutes.
2. Slowly squeeze the bottle instead of pouring the resin too quickly.
3. Use a toothpick to move the bubbles to the surface, then poke them or use a heat gun or a lighter to eliminate them with the heat (quickly).

Attention:
-Children should use this product under the supervision of an adult.
-If skin contact, please first clean with alcohol, then wash the skin with running water.
-Avoid contact with eyes. If eye contact, rinse immediately with plenty of running water.
-Store the product in a cool, dry place, protected from light.
-Please use it within one year after opening.