NHX EZPRODUO AC / DC Dual Balance Charger/Discharger – Dual Channel Charger with LCD display and Optimized Software for LiPo, LiHV, LiFe, LiIon, NIMH, NiCD, and PB batteries

DUAL CHANNEL CHARGER – The charger has two independent circuits that can simultaneously charge two batteries even when they have varying chemistries. The charger delivers 100W integrated power per channel that can fully charge batteries at up to 12A each. This is convenient when you need to charge more than one battery at once

Choose between Fast Charge, Balance and Storage Mode for Lithium Battery The battery charger has three modes one can choose from when charging a lithium battery. The function of the two modes differs from each other. FAST CHG mode minimizes battery charge time so that you can charge quickly. At the same time, STORAGE Mode has the capacity to control the final battery voltage, which is necessary and helpful for a rarely used battery. While BAL CHG ensures cells remain balanced with each other.

Specifications:
Charge Current: 2 x 0.1A-12.0A
Circuit Power: 2 x 100W
Discharge Rate: 0.1A-2.0A
Current Drain Balancing: 500mAh per Cell
LiPo/LiHV/LiFe/LiIon: 1-6 Cell
NiCd/NiMH Cell Count: 1-15 Cell
Pb Battery Voltage: 2-20V
Memory: 10 different charge/discharge profiles
Input: DC 11.0V-18.0V - AC 100V-240V
Display Backlight: Blue
Length: 131mm (5.1 in)
Width: 98mm (3.8 in)
Height: 158mm (6.2 in)
Weight: 850g (1.8 lb)

Included Accessories:
Deans Charge Leads (2)
EC5 Charge Leads (2)
EC3 Charge Leads (2)
XT90 Charge Leads (2)
XT60 (built into the Charger) (2)
Tamiya Charge Leads (2)
Receiver (RX) Charge Leads (1)
JST Charge Leads (1)
Alligator Charge Leads (2)
AC Plug
Instruction Manuel