Maitreya Buddha Design Silicone Candle Mold Scented Soap Wax Mold 3D Silicone Mold for Aroma Gypsum Ceramic Resin Concrete Crafts Decorations

Details of Silicone Molds
Size of Final Candle Mold: 7 * 3.6 cm（2.8*1.4Inch)
Final Candle Weight:45g(1.6Oz) Color:Pink
Application:Soap Mold, Candle Mold, Wax Mold, Aromatherapy Gypsum Mold,Cake Mold, Chocolate Mold,Concrete Mold,resin craft mold,
Feature of mold : non-toxic,odorless,soft and flexible,no shrinkage, no deformation,high tear&tensile strength,high temperature resistance.

Notification:
1, this buddha is a mini buddha , it is not very big,please check the size of final buddha carefully before you paid,if you think it is small , please don't order it , thanks .
This buddha mold is 3D mold ,the mold is soft and flexible,it is still easy to demold .But pls cut an opening on the mold if you can not take out the product easily,you can see our picture.

Operating instruction for the mold :

1, Use knife to cut an opening on the side of mold if you can not take it out easily.
2, Using rubber bands to tie up the molds .
3, If you make candle , you need to make a hole at the center of the mold bottom ,Lift up the wick with a stick ,and insert the wick from the top to bottom .
4,Pouring the material into the mold , you can shake the mold to help release the bubble.
5.Take off the rubber bands after the material is cured.
6, Take out the product from the opening of the mold carefully.

If you have any questions about using the mold, pls kindly contact with us directly , it will be our great pleasure at service for you .