A classic product that can be used for both cutting and twisting.
By digging a groove into the leather, the thread will sink and reduce pilling and shedding caused by friction.
It can also be used for drawing, so it is recommended if you are looking for a multi-purpose tool.

Features:
1. Adjustable width can be used up to 12mm to 1mm minimum.
2. Replacing the guide left or right for both right handed and left handed use.
3. Replace the blade edge for guideline drawing, grooving, twisting, and using dividers.
4. Even if the sharpness becomes bad, you can simply replace it with the replacement blade (sold separately).

How to Use:
1 | Hand-sewn to create a groove in the holes (minimum width 1mm and maximum width 12mm)
Threads into the grooves reduce friction and prevent line fraying

2 | You can change the guides on the leather edge to fit both right and left handed

3 | Use the included hex wrench to replace the groove (flutter) to the modela (linear draw).
Replacement blades (sold separately) are also available.

4 | Can be used as a small groove to bend leather
Simply remove the guides and pull the grooves on the ruler to bend the leather neatly in the desired position.

5 | Bend in groove

[Note]
Do not use for anything other than handicrafts.
The blade edge is sharp, so please handle with care.
When storing for a long period of time, please use a thin coat of sewing machine oil or other similar materials.
Keep out of reach of children.