Description: The lightsaber storage rack is a great way to display colors and lightsabers. Features: 1. Durable Materials: The light saber is made of durable acrylic, which is durable enough and can last for years. 2. Beautiful display tool: The lightsaber rack is transparent and clear, and it will not appear visually inconspicuous when installed on the wall. Name: lightsaber wall mount bracket Material: Acrylic color : transparent Size: about 8*6*5cm/3.15*2.36*2.36in (length*width*height), thickness 4mm/0.4in Packing list: 2 pairs of supports 8 screws 8 * expansion tube Note: Please allow slight tolerances in size due to manual measurement, and the lighting in the photograph may lead to a difference in color from what it is in real life. Installation guide Tools: Drill bit - 4/32 (you need this to predrill hole for dry wall anchors that come with product) Phillips head screw driver, Drill, Hammer, Level, Tap measure, Stud finder, Pencil. Tips: Figure out where the mount will work best on your lightsaber hilt. They are all different so you might have to move the mount so it fits best with your saber. Install the Hilt mount first. Make sure it is level, mark the wall with a pencil in the holes on the mount. Use a 4/32 drill bit to predrill hole. When done score the opening a little to help the anchor set. DO NOT DRILL INTO STUD. Lightly tap the anchor into the wall with hammer. If you make the hole too big the anchor will not work. Once the hilt mount is set, the put the light saber on the mount. Hold the sabers blade using the blade mount. Place your level on the blade to make sure its. level. Mark the wall and follow same steps. Do not over tighten as you might crack the mount or break the anchor. This mount will NOT work for Dark saber.