Otomin New Fishing Bobbin Knotter FG GT RP Line Wire Knotting Tool Fishing Line Winder Assist Knotting Connector Accessories
Steps:
1,Put in the PE line through the pipe and insert the PE line rubber stopper.
2,Rotate the line roller to keep the PE line at least 20 rounds.
3,Then adjust the side knob's tightness based on your line lbs.
4,Pull out both the PE line & leader about 30cm and keep them straight.
5,Use your finger to round the PE line and leader together 3 rounds ,then hold tightly on your left hand.
6,Use your right hand to hold firmly onto PE line spin the PR bobbin knotter 4-5 rounds.
7,Use your left hand to hold the PE line ,spin the PR bobbin towards the right sides, and make sure the bobbin is tight ,adjust the knob if necessary.
8,Spin the bobbin to have the knot 8-12 cm,and keep 20-25cm for third round of PE line cut the balance.
9,Then secure the PE line with a knot on the leader and repeat 4-6 times.
10,And burn the leader end with lighter to prevent PE line damaged from sharp angler.
11,Add knots with PE line for 6-8 times, and make a reverse knot on the PE line to secure.
12.Then burn the line end ,and pull two sides of GT knot tightly.
Now it is completed successfully.
Specifications:
Type:GT / PR/FG Knot Bobbin Knotter Assist Device
Color:gold,red.blue,black
Weight:1.76 ounces/50 grams
Line Scope:1-10 # PE Line
Material:Stainless Stainless metal
Package included: 1x Fishing line winder 1x Instructions