Search

Search

Rug Gripper Tape for Hardwood Floors and Tiles，8 PCS Non- Slip Rug Pads Double Sided Carpet Tape Rug Corner Grippers for Area Rugs Washable Reusable Runner Rug Sticky Pad（White）

KWD 2
Brand
T TIGABEAR
Category
Home Décor
Weight
32 g
– 1 +

Special Features

  • Carpet tape is designed to keep your carpet from slipping or curling in the corners of your carpet and works on any shape of carpet, indoors or outdoors, keeping your carpet secure and in place. Avoid slip and fall accidents and properly solve annoying carpet problems.
  • These rug grippers for area rugs with triangular design, strong double-sided adhesion, greatly increasing the contact area.
  • Made of high-quality material, instead of using glue to fix the carpet to the floor. Even if the anti-slip sticker is repeatedly removed from the wooden floor, it will not damage the floor. Our gripper is suitable for most types of floors such as tile, hardwood, laminate, and marble, etc.
  • 【Washable & Reusable】The carpet gripper can be cleaned with water and air dry to restore stickiness, then you can reuse it as sticky as a new one. Note: If the backing of your rugs has fluff or fiber, it is not suggested to remove the grippers from your area rugs to wash. Just clean or wash the grippers on the rug.
  • 【Easy To Install】 The non slip adhesive rug pads are with dual-side stickers, separately in white and clear color. First, peel off the white sticker and stick the rug pads on the bottom of your area rug. Second, peel off the clear film and stick the rug pads on the floor. Third, press hard to make sure they paste firmly. Note: Must Clean the contact surfaces of the rugs and floors before sticking!

Description

Floor mats often move?
Sometimes, the floor is too smooth, carpets and mats are easy to slide, will lead to falls.
Try (T TIGABEAR) the latest Non Slip Rug Grippers, the adhesion is super strong, can tightly suck the ground, carpets, mats do not slide, greatly enhance the safety.
Product Inclusion: Triangle Rug Grippers x 8 pcs
Widely Use: tile, hardwood, laminate, and marble,etc.

How to Install？
1. Peel off the white release liner from back.
2. Stick firmly to the underside of the rug.
3. Peel off the clear release liner
4. Stick the rug to the floor and press it.

How to clean？
1.Remove the PU layer from the carpet.（Do not tear The adhesive sticker layer）
2.Rinse the PU layer with water until the surface is clean.
3.After the PU layer is dry, stick it back to the original place.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}