Godox Xpro-C 2.4G X System TTL Wireless Trigger Transmitter with 2X X1R-C Controller Receiver for Camera,E-TTL II Function,Compatible with 600EX-RT/580EXII/580EX/430EXII/V860C Flash
PERFECT COMBINATION - Godox Xpro-C E TTL II Wireless Flash Trigger built-in Godox Wireless X System which can control camera flash,outdoor flash as well as studio flash, when combined with Godox X1R-C Receiver, it can also control the original Nikon Flashes,Featuring multi-channel triggering and stable signal transmission,perfect combination for studio flash solution.
TTL AUTOFLASH - Fully support TTL Autoflsh,1/8000s high-speed sync,Multi flash, Manual Flash, Flash Exposure Compensation, TCM Transform Function, Magnet Function, One-Shoot & Multi-Shoot Setting, Group Modeling Lamp Control, Group Zooming, Adjusting All Groups' Output Value Simultaneously, etc
MULTI-FUNCTIONAL - Can be used as a Wireless Godox Flash Trigger / Wireless Speedlites Trigger/ Wireless Shutter Release Trigger/ Flash Trigger with 2.5mm Sync Cord Jack Support E-TTL II Autoflash and Professional Functions
X1R-C RECEIVER - Godox 2.4G TTL Wireless Flash Trigger Remote Control Receiver for Nikon with Gr group flash and wireless grouping system (32 channels & 5 groups)and triggering the flash.
LCD DISPLAY - Both the Xpro-C & X1R are equipped with large LCD display,offs you convenient operation and make the work more efficient.
Description
Compatible EOS Cameras for This Flash Trigger as Bellow: 1DX 7D 6D 80D 750D 700D 650D 600D 550D 500D 450D 400D 5DIV 350D 100D 1200D 1000D 1100D M5 M3 5Ds/5Dsr 5D Mark II
SPECIFICATION:
Xpro-C Flash Trigger Transmitter
Brand: Godox
Model: Xpro-C
Compatible cameras: series cameras (E-TTL II autoflash)Support for the cameras that have PC sync socket.
Power supply: 2*AA batteries
Flash Exposure Control:
TTL autoflash: E-TTL II
Manual flash: Yes
Stroboscopic flash: Yes
Function:
High-speed sync:Yes
Second-curtain sync :Yes
Flash exposure compensation: Yes. ±3 stops in 1/3 stop increments
Flash exposure lock: Yes
Focus assist: Yes
Modeling lamp: Control the modeling lamp by the flash trigger
Beeper: Control the beeper by the flash trigger
Wireless setting: The receiver end can control the camera shooting through the 2.5mm sync cord jack
ZOOM setting: Adjust the ZOOM value by the transmitter
Firmware upgrade: Upgrade through the Type-C USB port
Memory function: Settings will be stored 2 seconds after last operation and recover after a restart.
Wireless Flash:
Transmission range (approx.): 0-100m
Built-in wireless:2.4G
Modulation mode:MSK
Channel:32
Wireless ID: 01-99
Group:16