4 PCS Diamond Polishing Pads, Glass Grinding Pads for Sanding Concrete Glass Stone Granite Marble

【Durable】: The diamond hand wipe is composed of high-strength diamond and high-elastic sponge, with high wear-resistan-t operation strength and reusable.
【Complete Set】: The diamond pads include grits 60#, 100#, 200#, 400#. One set can satisfy most of your polishing work. The foam back of these diamond sanding pads are soft and light, which are suitable for you to hold.
【Dry and Wet Use】These diamond polishing pads can be used directly dry or wet on the surface of the object for polishing,After using, please squeeze out the water and put it in a ventilated and dry place to prolong the service life.
【Multiple Options】: Diamond sanding pads are available in four different sanding degrees.The finer the sand, the better the polishing effect; the coarser the sand, the better the sharp effect.
【Widely Use】: Can be used in both dry and wet polishing. The sponge backing is absorbent. Work greatly for glass working, wood deburring, metal dedusting, stone polishing, tile, granite, ceramics, and other polishing. Easily and quickly solve the problems such as chipping, burrs, and edging in your life.

Electroplated Tech

Electroplated With Top-Quality Super-Abrasive Diamond, More Efficiency You Will Enjoy.

Complete Series

Complete Set: Include Grit 60#,100#,200#,400#.One Set For All Your Work.

Foam Backer

Foam Backer: Soft and light, though the work is tough, you feeling always comfortable.

Specification:

Material: diamond and foam

Grits: 60# (red), 100# (yellow), 200# (blue), 400# (green)

Size(approx): 3.7*2.3*1.2inch / 95*60*30mm

Please Note:

1. Due to the light and screen difference, the color of diamond polishing pads may be different from the pictures

2. There are 0.5 -2 cm differences due to manual measurement and different batches

Durable:

The diamond hand wipe is composed of high-strength diamond and high-elastic sponge, with high wear-resistan-t operation strength and reusable.

Suitable for:

60# is used for general slate and floor tiles, 100# is used for ordinary tiles, 200# is used for glass, and 400# is used for fine polishing.

Widely Used:

It can be widely used in stone polishing, tile trimming, glass burr trimming, metal polishing and renovation, wood deburring, etc.

Uses:

Help you quickly solve the problems that you often encounter in life such as chipping, burrs, and edging.

Hello,