The Noga Cine Pro Set includes a 10.7" articulating arm that holds up to 10 lb, and three adapters/converters that will allow for broader and more efficient use.

The 1/4"-20 Quick Release Adapter is a pull-release adapter with a 1/4"-20 threaded screw on top and 1/4"-20 threaded hole on the bottom. It's made up of two parts that are securely attached together via an M6 stud. The top portion can simply be pulled off, leaving the bottom portion attached wherever you have it attached. This way you can quickly and easily pull your attached accessory/device off without having to unscrew it.
The Xchange Cube Adapter has a 6-sided cube design and a threaded hole on each side, featuring three 1/4"-20 and three 3/8"-16 holes in total. The holes run 1/4"-20 to 1/4"-20, 1/4"-20 to 3/8"-16, and 3/8"-16 to 3/8"-16. You can use the Xchange Cube as a converter or extender, or as a stud to hole converter.
The 1/4"-20 Female to 3/8"-16 Male Converter offers a 1/4"-20 threaded hole on one end and 3/8"-16 threaded screw on the other. It has a knurled design providing for an easy grip.
The articulating arm has a 1/4"-20 screw on both ends and accepts any of the three adapters on either end. It has a central locking ratchet lever that locks the arm in place at once.

Noga Cine Arm DG Hold-It Arm

The Cine Arm DG Hold-It Arm from Noga is a 3-joint mounting arm with 1/4"-20 screws on both ends that allows you to attach an accessory such as a monitor or light on a camera with a 1/4"-20 slot. This flexible arm can be easily adjusted as per your requirement. It also features a central locking ratchet lever that locks the arm in place.

Central locking ratchet lever
1/4"-20 screws on both ends
Rugged metal design
Load capacity of up to 10 lb
Anodized black oxide finish
Noga Quick Release Adapter (1/4"-20 Male to 1/4"-20 Female)

Make quick changes to your setups with the compact, pull/push Quick Release Adapter fro