Search

Search

-5%

NICEYRIG Quick Release NATO Lock Clamp with 1/4'' 3/8'' Thread for NATO Rail Ball Head Friction Arm- 024

KWD 9
Brand
NICEYRIG
Weight
41 g
– 1 +

Special Features

  • HOW TO ADJUST THE CLAMP FOR MULTIPLE DIFFERENT SPEC RAILS | 1) Take out the 2 Phillip head screws 2) Remove the little cover and red lever 3) Slip the clamp over your rail, re-position and then tighten down the star wheel with the red lever, set the clamp pressure where you like it for your rail 4) Re-install the cover
  • The NATO Clamp comes with a locking lever for quickly lock and release
  • Features 1/4"-20 and 3/8"-16 locating holes on the top, allows to mount ballhead, friction arm, cold shoe adapter, etc.
  • The NATO clamp is pre-adjusted to accomodate to the 20.5mm width NATO rail. If your NATO rail is narrow or wider, it requires to re-adjust the NATO clamp's width
  • Constructed from aluminum alloy, the mini NATO clamp is sturdy and lightweight

Description

QR NATO Clamp 024 can be positioned by loosening the locking thumbscrew. Attach to any NATO rail accessories. With 1/4''-20 and 3/8"-16 mounting points on the top, which allows to mount many kinds camera accessories, such as ballhead, friction arm, cold shoe adapter for microphone, monitor, flash light, etc. Quick to lock and release.
Adjustable width to fit NATO rail of 20.5mm, working on NICEYRIG NATO RAIL, for other brands' please measure firstly.
HOW TO ADJUST THE CLAMP FOR MULTIPLE DIFFERENT SPEC RAILS :
1) Take out the 2 Phillip head screws;
2) Remove the little cover and red lever;
3) Slip the clamp over your rail, re-position and then tighten down the star wheel with the red lever, set the clamp pressure where you like it for your rail;
4) Re-install the cover
Attention: Not comes with the tool.
What you get:
1 x NATO clamp

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}