Search

Search

NICEYRIG NATO Lock Clamp with Quick Release NATO Rail 70mm for Video Monitor Microphone LED Light - 080

KWD 10.500
Brand
NICEYRIG
Weight
71 g
– 1 +

Special Features

  • 1/4"-20 and 3/8"-16 Locating Holes on the top, allows to mount small camera/monitor or wireless receiver
  • The NATO clamp is adjustable to fit NATO rail of 20.5mm width, so it works for most of the NATO rails on the market. It do need to get the lock at the right position when works for some NATO rail with particular width.
  • Cold shoe mount can be attached on the top, as well as other accessories such as LED light, monitor and microphone etc.
  • NATO Clamp with a locking lever for quick lock and release.
  • Comes with 70mm NATO rail accessory
  • HOW TO ADJUST THE NATO CLAMP FOR MULTIPLE DIFFERENT SPEC RAILS | 1) Take out the 2 Phillip head screws 2) Remove the little cover and red lever 3) Slip the clamp over your rail, re-position and then tighten down the star wheel with the red lever, set the clamp pressure where you like it for your rail 4) Re-install the cover

Description

The NATO clamp can be positioned by loosening the locking thumbscrew. Attaches to any NATO rail accessories. With 1/4''-20 and 3/8"-16 mounting points on the top, which allows to mount small camera, monitor or wireless receiver. Besides, this nato clamp with rail enables to mount additional accessories, such as LED light, monitor, microphone and cold shoe mount,etc. Quick Lock and Release.
HOW TO ADJUST THE CLAMP FOR MULTIPLE DIFFERENT SPEC RAILS :
1) Take out the 2 Phillip head screws;
2) Remove the little cover and red lever;
3) Slip the clamp over your rail, re-position and then tighten down the star wheel with the red lever, set the clamp pressure where you like it for your rail;
4) Re-install the cover
Attention: Not comes with the tool.
What you get:
1 x NATO rail clamp
1 x Safety rail (7cm)

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}