1/4"-20 and 3/8"-16 Thread Holes on the top, allows to mount small camera/monitor or wireless receiver.
The NATO clamp is adjusted to fit the NATO rail of 20.5mm width, so it works for most of the NATO rails on the market, it do need to get the lock at the right position when works for some NATO rail with particular width.
Cold shoe mount can be attached on the top, additional accessories also can be mounted, such as led light, monitor and microphone,etc.
NATO Clamp with a locking lever for quick lock and release.
HOW TO ADJUST THE CLAMP FOR MULTIPLE DIFFERENT SPEC RAILS | 1) Take out the 2 Phillip head screws 2) Remove the little cover and red lever 3) Slip the clamp over your rail, re-position and then tighten down the star wheel with the red lever, set the clamp pressure where you like it for your rail 4) Re-install the cover
Description
The nato clamp can be positioned by loosening the locking thumbscrew.Attaches to any NATO rail accessories . With 1/4''-20 and 3/8"-16 mounting points on the top, which allows to mount small camera/monitor or wireless receiver. Besides, this nato clamp with rail enables a way to mount additional accessories, such as led light, monitor, microphone and cold shoe mount,etc.Can Quick Lock and Release .
HOW TO ADJUST THE CLAMP FOR MULTIPLE DIFFERENT SPEC RAILS :
1) Take out the 2 Phillip head screws;
2) Remove the little cover and red lever;
3) Slip the clamp over your rail, re-position and then tighten down the star wheel with the red lever, set the clamp pressure where you like it for your rail;
4) Re-install the cover
Attention: Not comes with the tool.
Package Include:
1 x NATO Rail Clamp
1 x safety rail(7cm)