Introduction:
This full decoded BLS5 DC-coupler with USB cable allows you to connect with a power bank as external power source to be used with the camera, replacement for BLS5/BLS50/BLS1 battery.
USB plug is designed with voltage conversion circuit, and works with DC 5V 2A-4A power source.
Connect the USB plug to power source and put the coupler into the camera battery compartment to provide stable and continuous power supply for your camera.
Enables you to use external power source with your camera to achieve long time shooting, no need to replace camera battery again and again.
Features:
Input: 5-5.5V 2A-4A
Output: 8V
DC Port：DC 5.5*2.1mm
Conversion efficiency: 87% (DC-DC Efficient conversion rate)
USB plug Specifications: USB2.0
Total Length: 200cm
Compatible Battery/Charger Part Numbers:
OLYMPUS PS-BLS5/BLS50/BLS1
Compatible Camcorder / Camera Part Numbers:
Olympus E-PL1、E-PL2、E-PL3、E-PL5、E-PL6、E-PL7、E-PL8、E-PL9、E-PM1、E-PM2、E-PM3、E-P1、E-P2、E-P3、E-P10、E-M10、E-M10II、E-M10III、E-M10IV、E-400、E-410、E-420、E-450、E-600、E-620、STYLUS 1...
Package including:
1 x Full Decoded DC-Coupler with USB cable
NOTE:
In order to make your camera work better,please use equipment with sufficient power 5V 2A and above (charger, power bank, mobile power supply);
When the power is not enough, will not start or can not shoot properly.
Do not use the computer USB supply for the camera,because most computer USB 2.0 output voltage is 5V,But the current is less than 500mA.