All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
The ESP32-S3-DevKitC-1 is an entry-level development board equipped with ESP32-S3-WROOM-1, a general-purpose Wi-Fi + Blue-tooth LE MCU module that integrates complete Wi-Fi and Blue-tooth LE functions. This version is equipped with the ESP32-S3-WROOM-1 with 8MB Flash and 8 MB PSRAM
Note: The S3 is similar to the ESP32-S2, But adds a dual-core and Blue-tooth LE (not classic!) However, there is minimal support for this dev board. For example, as of the time of this writing, there is NO Arduino or Circuit-Python support, ESP IDF ONLY! Please purchase if you're doing development with the S3
Most of the I/O pins on the module are broken out to the pin headers on both sides of this board for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-S3-DevKitC-1 on a breadboard. There's a debug UART/USB port and a separate native USB port, so you can upload/debug/USB all at once
At the core of the modules is an ESP32-S3 series of SoC, an Xtensa 32-bit LX7 CPU that operates at up to 240 MHz. You can power off the CPU and make use of the low-power co-processor to constantly monitor the peripherals for changes or crossing of thresholds
ESP32-S3 integrates a rich set of peripherals including SPI, LCD, Camera interface, UART, I2C, I2S, remote control, pulse counter, LED PWM, USB Serial/JTAG controller, MCPWM, SDIO host, GDMA, TWAI controller (compatible with ISO 11898-1), ADC, touch sensor, temperature sensor, timers, and watchdogs, as well as up to 45 GPIOs. It also includes a full-speed USB 1.1 On-The-Go (OTG) interface to enable USB communication
There are three mutually exclusive ways to provide power to the board:①USB-to-UART Port and ESP32-S3 USB Port (either one or both), default power supply (recommended). ②5V and G (GND) pins. ③3v3 and G (GND) pins
What you will get: 2 X ESP32-S3-DevKitC-1-N8R8 Development Board
DIYmall 5PCS 12 X WS2812B RGB LED Ring 12 Bits WS2812 5050 Lamp Light with Integrated Driver Full Color Light DC 5V for Arduino Raspberry Pi
KWD 7
DIYmall ESP32 DEVKIT ESP32-WROOM-32 Development Board ESP32 ESP-32S 2.4GHz WiFi+BT BLE Dual-core Dev Module CP2102 for Arduino DOIT
KWD 7
DIYmall ESP8266 Firmware Downloader Flash Download Tool Test Board Code Burner for ESP8266 ESP-01S/01 ESP-07/07S ESP-12E/12F/12S/F
KWD 5
Green Light Optical Fingerprint Reader Sensor Module Compatible withArduino Raspberry Pi ESP8266 ESP32
KWD 11
