Fitment: Injector Pressure Regulator Valve Socket with seal kit Fits 2003-2010 Ford International 6.0L Powerstroke Diesel Engines.OEM Number:3C3Z9H529A , AP0035.
Material: Injector Pressure Regulator Valve Socket Made Of High quality machined from steel, O-ring Seals have high tightness, corrosion resistance and durability.
Injector Pressure Regulator Socket: Used to Remove and Replace the Injector Pressure Regulator (IPR) on Ford 6.0L and Other Diesel Engines. This is located in a very tight location.Tool is built to bottom out on the hex so it does not put torque on the connector in case it can be reused.Use with 3/8" square drive. Avoid using an impact wrench, improper usage may cause damage to threads on your IPR valve or vehicle.
The IPR valve screen is another common failure. The screen may become plugged with debris and be collapsed by the flow of high pressure oil as it tries to flow through the restricted screen. A torn screen will allow debris to enter the IPR valve which may damage the valve.
The IPR valve o-rings are a semi-common failure which will in turn result in such low oil pressure related symptoms as poor idle, stalling, and even a no-start condition. While there are other potential causes, such as a failed IPR valve, the o-rings themselves are often at fault, and are much less expensive to replace.
Description
Fits The Following Ford 6.0L Vehicles
For 2004-2005 Ford E-350 Club Wagon
For 2004-2010 Ford E-350 Super Duty
For 2004-2010 Ford E-450 Super Duty
For 2003-2005 Ford Excursion
For 2003-2007 Ford F-250 Super Duty
For 2003-2007 Ford F-350 Super Duty
For 2003-2007 Ford F-450 Super Duty
For 2003-2007 Ford F-550 Super Duty
For 2004-2007 Ford F650
For 2004-2007 Ford F750
Replaces Part Numbers:
3C3Z9H529A
904-415
Package including:
IPR Valve Socket Tool
Updated Screen Mesh Filter
O-rings x3