7-70V 30A PWM DC Motor Speed Controller Switch Control 12V 24V 36V 48V with 30 Amp Fusefor Power Wheels Speed Control

Special Features

✹✹ Can be use on long hours of work: Circuit optimization design, stable Adjust the motor smooth no noise no vibration, with power indication, wide duty cycle adjustment range
✹✹PWM Frequency and Share Space: 12KHZ ,The knob has a switch function, which can control the motor speed from 0% to 100%.
✹✹ contains a 30A fuse to prevent shorting of the motor interface. Double protection of your Motor and Motor Speed Controller.
✹✹Using imported high-voltage MOS tube, three pressure 100V high-frequency low-resistance capacitors, automotive fuses
✹✹Wide Voltage Range： Wide voltage input 7-70V, maximum output current 30A (If the operating voltage is high, then the operating current needs to be reduced. Please use it refer to the power, which will better protect the motor and the Controller. It is recommended that 12V within 300W, 24V within 400W, 48V within 450W, and 60V within 500W.)

Description

Used for Children's Toy Car

If the product is used in the modification of children's car, the output end of the speed controller can be connected with a Forward and Reverse Switch to realize the function of forward and reverse control.

If there is a forward and reverse circuit regulator on the children's car, please be sure to connect the speed controller in front of the forward and reverse circuit regulator of the children's car.

Otherwise, the speed controller may be damaged.

Note：
1.This product is a DC brushed motor speed controller. It needs to be equipped with a DC power supply to supply power to the governor. It cannot be connected to AC power and cannot drive a brushless motor.
2.Before wiring, please read the wiring label clearly. The input is DC, and the positive and negative poles should not be confused. The output connection to the motor (motor) does not need to be divided into positive and negative, if the running direction is wrong, please replace the two wires of the motor.

Feature:

1>. On-board power ON-OFF control switch

2>. Dual 30Amp Fuse to protect circuit inside and motor

3>. DC 7-70V wide voltage so that adapt to more DC motors

4>. 30A strong current output to provide enough driving capacity for the motor

5>. Potentiometer to adjust PWM from 0% to 100% which can control motor's speed

Parameter
Work Voltage: DC 7.0V~70V

Drive Current: 30A(Max)

Control Power: 12Vwithin 300W; 24V/400W; 48V/450W; 60V/500W

Duty cycle: 0%~100%(Adjustable)

Work Frequency: 12KHz

Work Temperature: -40℃~85℃