FUNCTION: As time goes on, the E-track fixed on the wooden board will loosen,or when your cargo is too heavy, your E-track will wobble.At this moment, you need a backing plate to be installed behind the board to fix the E-track!
APPLICATION:Compatible with all standard universal E-Tracks and X-Tracks.These backing plates are work for single or multiple E-track/X-Tracks mounts
NEW DESIGN:Different from others, our back plate fits perfectly with the bolting holes of the E track without skipping the rail hole,thus the screws can be installed in each track hole to make it lock more firmly.
MATERIAL:High-quality steel plate, no deformation; Galvanized to prevent corrosion and rust.Equipped with locking nuts,avoid the loosening of screws due to wobble.
SIZE:3"L*6"W; Bolting holes on both sides size: 2-1/8" apart on-centers; 1.8mm thickness.Enlarging the bolting holes'diameter to avoid the misalignment of the bolting holes and the E track holes caused by the deviation.
Description
Applicable:
The back plates increases the strength and support of the E-track and really helps to tying a heavy load to the E-track
Suitable for all standard universal E-Tracks.These backing plates are work for single or multiple E-track mounts.
Can be installed on various lorries, trailers, trucks, or warehouses
Material:
Alloy steel
1.8mm Thickness
Won't deform;Won't wobble
Installation:
Drill holes on the wooden board to make it aligned with the bolting holes of the backing plate and E track, and then tighten the screws to finish installatin
When used for the standard multiple E-track, it can be installed in the bolting holes on both sides; When used for a single track, it can be installed in the middle bolting hole
Package Contains:
12 Back Plates
48 locknuts
48 bolts
96 Flat Washers
After-Sale Service:
If you have any questions, please feel free to email us.