Street Ready - The COMP Cams Performance Street spring line is designed to accommodate performance hydraulic flat tappet camshafts.
Modern Spring Design - Performance Street Springs deliver extra valvetrain stability, ensuring additional durability and performance in street engines.
Modern Performance + Vintage Iron - COMP's Performance Street Springs are available in installed heights from 1.470" to 1.900" and . O.D.'s from 1.105" to 1.509", making them ideal for a wide range of modern heads and OE iron heads. Just match your spring pocket measurements to the appropriate spring base OD, then check the spring max lift against your valve lift to ensure a good spring for your heads.
Ford 4.6/5.4L 2-Valve Modular - The COMP Cams 26113 Beehive spring is ideal for use in Ford 2-Valve Mod Motors, delivering increased valve lift capacity and stability. Blown/Turbocharged cars benefit from the 26125-16 springs.
The 26113 Beehive spring is compatible with 702, 763 and 791 Titanium Retainers, 710 and 792 Steel Retainers as well as the 1723 and 1763 Tool Steel Retainers. 4673 is the recommended locator for the 26113.
COMP Cams 98012 Vavle Spring
KWD 23
COMP Cams 26995-16 Performance Street 1.415" OD Beehive Spring; 1.700" Installed Height; 16 Springs
KWD 94
-12%
COMP Cams 26915-16 Performance Street 1.290" OD Beehive Spring; 1.800" Installed Height; 16 Springs
KWD 73.500
-16%
COMP Cams 235 Engine Finishing Kit for Small Block Ford
KWD 15.500
