It can greatly improve the efficiency of the DC/DC converter and there is no dead zone voltage caused by the Schottky barrier voltage.
Synchronous rectification is a new technology that uses special power with extremely low on-state resistance to replace rectifier diodes to reduce rectification losses.
When using a power as a rectifier, the gate voltage must be synchronized with the phase of the rectified voltage to complete the rectification function, so it is called synchronous rectification.
Power is a voltage-controlled device, and its volt-ampere characteristic is linear when it is turned on.When using a power as a rectifier, the gate voltage must be synchronized with the phase of the rectified voltage to complete the rectification function, so it is called synchronous rectification.
Description
Input voltage: 10-90VDC
Output voltage: 1.5-60VDC(applicable to applications where the input voltage is higher than the output voltage and cannot be boosted)
Output current: 6A(Max)(Please derate to use when high voltage output, the module temperature over 65 degrees requires additional heat dissipation)
Maximum power: 100W(The max current is 6A at low voltage output. The maximum power is 100W at high voltage output.)
Working frequency: 180KHZ
Conversion efficiency: 97.5% (typical value)
Input anti-reverse connection: Yes