Upgrade Parts Are Direct Replacements For Stock Components; Additional Parts Are Not Required
This Item Works With: Traxxas Latrax Rally,Latrax Sst, Latrax Teton 60T Super Main Gear Upgrade Parts 1:18; 1/18 Pxtoys 9300 9303 Upgrade Losi Mini t 1.0
Material:Hard Steel, Super Durable Use, Better Heat Dissipation,This Meshes Perfectly With The Traxxas Pinion Gear And Only Makes a Little Bit Of Extra Noise Vs The Stock Plastic Gear. We Suggest You Use It In a Latrax Prerunner With a 10 Tooth Pinion.
Lubricate With Lube Will Bring Better Performance,After Spraying a Little Grease On It, The Buzzing Will Go Away And It Ran Fine!
Adjusting The Mesh Like This: Remove The Little Oval Metal Piece From The Motor Mount. Loosen Both Motor Screws And Roll a Folded Piece Of Paper Through The Spur And Pinion While Pushing The Gears Together. Then Tighten The Screws. I Also Tried a Single Layer Of Paper But It Was Too Tight And There Was a Lot Of Noise
2Pcs Hardened Steel 20T Motor Pinion Gear for Traxxas 1/5 X-Maxx XMAXX 6S 8S 1/6 XRT 1/10 EREVO 2.0 Maxx Upgrade Parts
KWD 7
2pcs 3945X Hardened Steel 15-Tooth Pinion Gear (32 Pitch) for Traxxas Slash Rrustler Stampede Raptor 4x4 VXL TRX-4 TRX-6 15T Upgrade Parts
KWD 7
4Pcs Metal Orange Big Bore Shocks Absorber Damper for Traxxas Slash Rustler Stampede Hoss Bandit Nitro Rally 2WD 4x4 VXL Upgrade Parts
KWD 14.500
2Pcs Machined Hardened Steel 13T Motor Pinion Gear for 1/8 Traxxas Sledge Replace 6483X (1.0 Metric Pitch) (fits 5mm Shaft) Upgrade Parts
KWD 7
