Feature:
The hub assembly removal tool provides a simple method to remove the wheel hub, greatly improves work efficiency, and saves time.
The excellent impact-rated hub bearing removal tool does well in tackling the most stubbornly corroded or tightly stuck hub.
The wheel hub removal bolt kit has 2 M14 press bolts and nuts, 2 M12 press bolts and nuts, and two press feet. This remarkable wheel hub removal tool is good at removing most hub.
Hammer out 1-2 wheel studs to insert the M12 or M14 thread bolts or use free hole locations existing in the hub, push against the knuckle assembly to force the hub out.
How to use?
1.Select the Correct Bolt Size and Remove 1 or 2Wheel Studs
2.Insert the Press Bolts and Grease the Nutsand Bolts to Reduce Friction
3.Attach the Nuts on the Backside and InstallPress Foot on the End of the Bolt to Provide AStable Base and Avoid Damage
4Hold The Nut on The Backside of The Hub withA Wrench and Use An Impact Wrench to ApplyForce to The Bolt and Push Against The Knuckle
5.Workback and Forth Alternating on Each PressBolt until the Hub Is Busted Free
Package:
2*M14 Press Bolts and Nuts
2*M12 Press Bolts and Nuts
2*Press Feet