Fits：
1984-2001 Cherokee XJ 4WD/2WD

KIT CONTENTS
(2x) Rear Bar Pin Flag Nuts
(4x) 5/16” X 1” Bolts
(4x) 5/16” Flat Washers
WHICH NEEDED
13mm wrench 5/8” Socket / Wrench
Air Hammer

INSTALLATION INSTRUCTIONS
SETP 1- After the shock absorber has been removed from the vehicle.
STEP 2- Using an air hammer, knock out factory welded in nuts.
STEP 3- Insert flag nut through access hole in the unibody.
STEP 4- Align the flag nut with the factory holes.
STEP 5- Install shock using supplied 5/16” x 1” bolts and washers.
STEP 6- Tighten shock bolts using a 5/8” socket or wrench.