📢PRODUCT DESCRIPTION：PartNumber: 905-211, Fits PVB Model 765CBV 1/2""& 765DBV 3/4"", Combines Bonnet Assembly Kit 905-047 and Poppet Assembly Kit 905-049.
📢Fix the leaking or dripping problem of your sprinkler system.

📢Before the installation:please clean up the debris in the valve.
1. Close the bottom valve handle and turn it to the level to close the water outlet;
2. Unscrew the small nut on the bell, and open the bell;
3. Open the plastic bonnet and remove internal debris. There should be no plastic fragments inside the device (special attention: do not remove the metal piece at the bottom of the reset device to prevent the spring under it from hurting you);
4. Replace with new bonnet and poppet valve kit and tighten by hand;
5. Place the bell on top of the metal screw, and then tighten the small nut. Be careful not to tighten it too tightly, just twist it by hand, just to fix the metal bell on the device, and keep a certain tension.

📢Reminder: In order to avoid replacing the bonnet and poppet valve again, if the temperature continues to be low and freezing, please cover the backflow prevention device with a blanket or heat preservation bag.
📢We focus on providing customers with different home accessories and outdoor supplies, the quality is through our control, it can solve some machine problems in any time for you. Buy more than one at a time and you can get amazing deals
100% Service Guarantee---If you got any product quality problems or other issue, you can contact us directly, we will do our best to solve for you.