Features:
This kit is set up to turn your electric fan on at 185 degrees and shut off at 165 degrees and will work with any 12 volt system.
It is a 3/8" pipe thread, this kit includes everything you'll need to hook up to your fan.
For the two red wires,please connect the long red wire to the battery and the short red wire to the fan.
If you have any questions, please contact us for more details.
Package Included:
2x 40A Relay with Wiring Harness
1x 3/8" Thermostat Switch 185'F On - 175'F Off
1x 3/8" to 1/2" Adapter
2x Inline Fuse Holder
2x 20 Amp Fuse
8x Ring Terminals
4x Wire Connectors
1x Wiring Diagram
Application:
2X 8 inch Fans
2X 10 Inch Fans
2X 12 Inch Fans
2X 14 Inch Fans
Single 8 Inch Fan
Single 10 Inch Fan
Single 12 Inch Fan
Single 14 Inch Fan
Single 16 Inch Fan
Fit most Rods and Classics Engines including GM (CHEVY, GMC, OLDS, CADILLAC, PONTIAC, BUICK, FORD, & MOPAR (CHRYSLER, DODGE, PLYMOUTH) , Please measure to make sure this is the right
Work for 265 283 305 307 327 350 383 400 396 402 427 454 472 502 260 289 302 351W 347 352 360 390 406 427 428 429 460 351C 351M 400M 273 318 340 360 361 383 400 413 426W 440 455 330 326 ENGINES.
How to install:
Connect the color-coded wires, refer wiring diagram on package.
Red-to +12VDC
Coffee-to Fan Positive
Black-to Ignition
Grey-to Sending Unit
Notice:
Please check product pictures before purchase and please search video by "Fan Relay Installation" when install it in doubt.
Please ensure the inlet voltage is under or equal 12V, avoid excessive voltage to blow the fuse or cables.
The thermostat supplied with this kit is OE style to mount in the cylinder head of the engine or any water jacket.
Do not use tape on the sensor for may cause poor electrical contact or incorrect temperature readings.
You can crimp bigger wires to it If you intend to mount high-profile cooling fans. The 14AWG wires (15 amps) are not bigger enough for high
12 Gauge - 20Amps
10 Gauge - 30Amps
8 Gauge - 40 Amps