Search

Search

Time Delay Relay 10 Seconds 5 pin 12V 30A 5 pin SPDT

KWD 6.500
Brand
Aharon
Weight
46 g
– 1 +

Special Features

  • Here is the answer, a time delay relay. This relay fits most common single or dual beam HID wiring harnesses for an easy fix to prevent HID from starting before cranking the engine.
  • Relays are contact rated at 30A @ 14 VDC, and sealed for waterproof operation
  • 10 second delay before switching On
  • Avoid those pesky ignition errors, flickering/fluttering HID, and needless wear and tear on ballasts.
  • Not only suitable for HID, can be used in any 5 pin relay harness, like for the oil pump

Description

- Rated Voltage: 12V - Operating Voltage: 11VDC ~ 15VDC - Delay time (operate time): 10SS ± 1S - Contact Rating (resistive): 30A/14VDC - Max. Switching power: 420W - Weight (approx.): 40g Pin lay-out; 30: Positive 12V feed power (from battery for example) 85: Negative / Ground 86: Positive 12V trigger to activate relay and timer (from headlight switch for example) 87: 10 second delayed output positive (Normally open) (to HID ballast for example) 87a: Normally closed and unused (12V positive when 12V on pin 86, power switched to pin 87 after 10S).

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}