✔Product Information:
Part Type: A/C Compressor
Fuel Type: Diesel
Material: Metal
Item Condition: Aftermarket Part
Way of Use: Direct Replacement
Grooves: 1PK
Compressor Type: SVO7E
Oil: Pag 46
Voltage: 12v
Clutch Diameter (mm): 117
OIL OZ: 7oz
Refrigerant Compatability: R134a
Installation Instructions: Not included
Reference Number: 3C581-50060, 3C581-97590
Interchange Part Number: 3C58150060, 3C58197590
Other Part Number: 447280-3090, 447260-5780, 447260-5781, 447260-5782, 447260-5783, 447260-5784, 447260-5791, 447220-6771, 447220-6750, 447200-9130, 447200-9490
WarrantyPeriod: 6 months. If there is any problem during this period, repair or replacement service will be provided.

▶Application:
For Kubota M96S All Models
For Kubota M108 TRACTOR***NOTE-ONLY S, SHDC, HDC2, DSC, and DSC2 Models.
For Kubota M110 only X and XDTC Models
For Kubota M108S only SHDC, HDC2, DSC, DSC2 Models
For Kubota M5040 TRACTOR ALL MODELS
For Kubota M7040 TRACTOR ALL MODELS
For Kubota M8540 ALL MODELS
For Kubota M8540(FC), Kubota M8540(DTC), Kubota M8540, Kubota M8540(DT), Kubota M8540(HDNBC), Kubota M8540(F),
For Kubota M8540(HD), Kubota M8540(HDNB), Kubota M8540(HDNBPC), Kubota M9540(DT), Kubota M9540, Kubota M9540(DTC),
For Kubota M9540(FC), Kubota M7040(HDNBC), Kubota M7040(DT), Kubota M7040, Kubota M7040(DTC), Kubota M7040(FC),
For Kubota M5040, Kubota M5040(C), Kubota M5040(DT), Kubota M5040(DTC), Kubota M5040(HDC), Kubota M6040(HDSDT), Kubota M6040(HDSDTC)

★Basic Requirements when servicing an A/C system:
1. The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened.
For warranty Purposes buyer must show evidence of receiver/drier replacement.
In some vehicles the drier comes attached to the condenser so it must replaced as well.
2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.
3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.
4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.
5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.
6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced.
7. As shipping limit, we put few oil before shippment, so when you get the compressor, please pour out all the compressor oil, and imput original oil.

☎Attention:
Reliability - The parts are excellent and fast after-sales service.
Parts Updates - According to the original factory specifications manufactured, tested.
CustomerFirst – We committed to provid you good buying experience.
Terms of Sales - The amount we charged only covers the product, shipping and handling. Any custom or import tax is Buyer's responsibility.