MAXIMUM SUPPORT / HIGH ENERGY

Is it cold in here or are you just sporting some perky bushings? Stuff these chubby puppies into your trucks and get ready to bounce out of every carve with tons of energy and rebound. Poured in Orangatang's extra lively and energetic Randy Urethane formula.

Package includes two tall barrel bushings (0.66″ H x 1″ D), two short barrel bushings (0.56″ H x 1″ D), and four thin and strong flat washers.

COMPATIBILITY

Nipples are NOT recommended for every truck on the market. They work great on Paris V2 and V3, Carver CX and C2, Tracker Fastrack, and Randal reverse kingpin trucks.

They DO NOT work on any traditional kingpin (street) trucks, such as Independent trucks or Paris Street Trucks.

If your truck is not on this list it may not be compatible, so please check the measurements and compare with your current bushings.

LONGBOARD BUSHING SPECS

Diameter: 1″ (25.4 mm)
Height (top / road side): 0.56″ (14.2 mm)
Height (bottom / board side): 0.66″ (16.8 mm)
Formula: Randy Thane
Durometers: soft (orange), medium (purple), hard (yellow)

RECOMMENDED WEIGHT RANGES

Orange / Soft: 75-200+ lb / 34-90+ kg
Purple / Medium: 150-250+ lb / 68-113+ kg
Yellow / Hard: 175-275+ lb / 79-125+ kg

INSTALLATION

Both top and bottom Nipple bushings feature a subtle chamfer on one edge which improves performance with cup washers. Orangatang recommends installing Nipples with the chamfer (or bottom of the printed graphic) oriented toward the washer, but feel free to experiment.