This professional RV water pump has an automatic start-stop function with a pressure switch, a built-in bypass switch, a reflux function, low power consumption, high performance, low noise, flexible installation, 360-degree installation without dead corners, convenient installation, convenient disassembly, low noise, and stable operation.
Features:
Equipped with a high-quality all-copper motor, it has low power consumption, high performance, and more stable operation!
The quick-connect port design on the pump head and the provision of connectors of various specifications and sizes can help you install it 360 degrees without dead corners, making it more user-friendly.
Equipped with anti-vibration rubber mounting feet, which can reduce working noise to a greater extent.
Equipped with a built-in pressure relief bypass, which can greatly reduce the frequent starting and stopping of the pressure switch!
Diaphragm pumps can work normally under the following conditions of use:
Ambient temperature +50℃;
Medium temperature 0~+65℃;
The pH of the medium is between 5.0-7.5;
The volume of solid impurities in the medium is
The power frequency is 50Hz, the voltage is DC 12V, and the voltage fluctuation range is ±10% of the rated value.
Water pump pressure switch adjustment method:
Step 1: Open the pressure switch cover with screws!
Step 2: Find the hexagonal hole in the center of the switch!
Step 3: Tighten clockwise to increase the pressure, loosen counterclockwise to reduce the pressure!

Specification:
Name:12V RV Water pump
Model: FL-701
Material: nitrile rubber
Product use: pumping water
Voltage: 12V
Traffic: 11.0LPM/2.9GPM
Current: 4.8A
Maximum current: 9.2A
Stop pressure: 50PSI/3.45BAR
Can pump liquids between 0-60℃
Ports: 1/2 inch pagoda connector and 1/2 threaded interface

Warn:
When the water pump is working, it is necessary to ensure smooth water discharge to avoid damaging the pressure switch due to blockage of the water pump!
Although the water pump supports short-term dry operation, please do not exceed 10 minutes!
This pump is a self-priming diaphragm pump with slight waterproof function. Please do not put it directly into the water!
This pump is a clean water pump. Please do not pump sewage with impurities to avoid clogging the pump head!
It is normal for the motor to heat up during use of the pump. Due to the built-in temperature control protector, it will automatically stop working when the temperature reaches a certain degree Celsius. Please feel free to use it.