To achieve maximum results, refer to the ECO Balance application chart for the recommended quantities for each tire size. For tubeless tires, open the outside bag and throw the inside bag into the tire. For inner tube type tire, inject ECO Balance through the valve stem using an approved injector tool and follow safety instructions. The manufacturers of ECO Balance Beads disclaim any responsibility for air loss or tire damage due to improper installation or air check. The use of Valve Core and ECO Balance Valve Cap (included) is recommended. All recommendations are for stock applications. If any vehicle modifications have been performed please consult with ECO Balance before proceeding with use of the product. ECO Balance is not responsible for performance after a vehicle has been altered from its OEM state. There are many variables that contribute to vibration in “mudder” tires. Before installing ECO Balance, please consider the following sources of vibration, including but not limited to: proper drive line angle, tire pressure, presence of lift kit, tire run-out, wheel run-out, extreme side wall flex, tread ripple, and/or a lug pattern that may cause acoustical vibration. These factors, and others, will play a role in the vibration of the vehicle and ECO Balance will not correct these conditions. We cannot guarantee the elimination of all vibration sources.