◇ Fuel Injector Noid Light Test Kit --- Check that injectors are receiving injection signals from ECU/PCM/PMU/AARP/NATO/NASA, plug these into injector connectors, idle air control, etc. to troubleshoot any electrical problems. noid light Confirm that injectors are receiving switch signals, start engine test signal Noid light indicates normal injector pulses.
◇ Harness Extension Cable --- With a seat belt extension cable length of 47 inches, it's very easy to hook it all up and you can sit in the driver's seat and watch the extension end when cranking the engine.
◇ Wide Applicable --- Comes with all sorts of different terminal configurations to match a wide variety of plugs out there. Compatible for BOSCH PFI, FORD TBI, GEO TBI, GM TBI, GM PFI, GM SCPI, GM MULTEC 2 GM 1987, GM 1982 EQUIPPED VEHICLES
◇ IAC Testers --- Compatible with GM IAC testers for flat and square quad connectors.
◇ Easy To Use --- Disconnect the fuel injectors and insert a small light. If the light blinks when the engine is on, the engine/program control module is supplying current to the injectors to open and close. If the light is blinking, no fuel is reaching the cylinder, the injectors are sticking or the fuel pump is inadequate. If no gas is reaching the cylinders, clean or replace the injectors.
Moker 50mm Crankshaft Crank Pulley Wrench Holder for Honda and Acura Engines (with 19mm Harmonic Balancer Socket), 2 Piece Socket Set
KWD 10
QISF 6.0 High Pressure Oil Pump IPR Valve Air Test Fitting Tool + Oil Rail Adapters Leak Test Kit for 6.0L Powerstroke Diesel Engine (3Pcs/Set)
KWD 6
3L Manual Transmission Fluid Pump Oil Filling Filler System Fluid Transfer Pump Tool with Adapters
KWD 28
Astro Pneumatic Tool 4607 5" PU Hook & Loop Backing Pad , yellow
KWD 6.500
