Helping owners to maintain their cars themselves at the most economical price, freeing them from the painful quagmire of expensive dealer repair bills! Instantly check the ATF fluid in your vehicle, when it is too much or too little it can overheat the transmission causing damage to the moving parts and affecting the proper functioning of the system. This is the time to replace an entire CVT at a huge cost. Get the essential transmission dipstick for your car at a more economical price, the perfect complement to independent maintenance and an effective way to extend the life of your engine. Transmission Fluid Level Indicator Dipstick Manufacturer's part numbers: 8863B, 9336, 9336A, 42RLE, NAG1, 62TE 2.7 3.5 3.6 3.7 5.7 6.1 6.4 How to use: 1. Keep the engine idling and depress the brake pedal, move the gear selector handle from "P" to "1" (or "L") and hold it in each position for a moment, after the above operation is completed, return the gear selector handle to the "P" position. When finished, return the gear selector to the "P" position. 2.Transmission up to normal operating temperature (70-80°C), then park the vehicle on a level surface and use the parking brake. 3. Check the oil level after allowing the engine to idle. Push the dipstick into the transmission fill tube until it rests against the tran base plate, then pull it out and read the oil level. Size: 52.75inch*1.36inch (O-ring diameter) Material: stainless steel Note: This is a measuring tool, not a car part, please always remember to remove it after use and do not leave it in the car!