|1x 2x 3x Drive Chains | Contact Us if you have Questions. Facebook Instagram - Quintessentialzzz

Introducing IQ Labs Newest Chain Guide Model 3, the first adjustable chain guide on the Market.

This Chain Guide is very quiet and the wheel freely rotates allowing the chain to move for smoothly as well getting more life out of your chain guide

It'll be nice a quite on your ride, so you can enjoy sounds of nature and the shredding of dirt, while keeping that chain on its chainring where it belongs.

The zinc Chicago screws makes sure you don't have worry about rust.

With your suggestions from the model 1 and model 2 chain guides on amazon, making it adjustable will allow it to fit more bikes and chain ring sizes, it's slimmer design allows for it to be put right behind the chain ring without touching the tire (tight fit means better chain retention), We have upgraded the ties to 70 lbs strength and added an extra slot to have 3 zip ties to the frame.

The Guide is manufactured by 3D printers, visible layer lines will be seen in the exterior of the product. Though made by 3D printer the chain guide is very strong and durable and all tests have been done with 3D printed models
This chain guide is a custom design by IQ Labs(TM) and all copy rights apply. Designed and Made in the U.S.A.
We designed it to perform better than the competition and making sure it is over built to withstand the rigors of mountain biking.
Fits most normal and fat bikes.

Instruction
>
Peel off the tapes Red backing to help prevent the Chain Guide from moving, install the chain guide as close to the front chain ring as possible without touching the chain ring or the tire, put the guide around the chain.
Make sure the flat side of the chain guide faces the back tire, Ziptie to the frame

Make sure the screws are facing out so you can adjust the height of the wheel on the guide and tension on the chain