It is known that fuel is delivered into an engine to mix with the air and produce the power needed for a vehicle. The fuel has to be introduced into engine at a specific time and the amount of fuel entering the cylinder is also crucial in determining the power generated by the engine. While fuel injector is responsible for injecting the fuel into the engine, the system that instructs the injector about the quantity of fuel and the time for injection is the FICM (Fuel Injection Control Module).
Fuel Injection Control Module (FICM) sends an electrical impulse to the injector, to deliver the correct amount of fuel to the engine cylinder at the precise moment it's needed. It's vitally important to the engine's performance and fuel economy. If your truck is experiencing injection fault codes, idling or running rough, no smoke ,or won't start your the FICM may need to be replaced. Replace it and get you 6.0 Powerstroke running right.
This Fuel Injection Control Module Fits For the Following Vehicles: 2004-2005 Ford E350 Club Wagon 6.0L; 2004-2010 Ford E350 Super Duty 6.0L; 2004-2010 Ford E450 Super Duty 6.0L; 2003-2007 Ford Excursion 6.0L; 2003-2007 Ford F250 Super Duty 6.0L; 2003-2007 Ford F350 Super Duty 6.0L; 2003-2007 Ford F450 Super Dut 6.0L; 2003-2007 Ford F550 Super Duty 6.0L; 2004-2008 Ford F650 6.0L; 2004-2008 Ford F750 6.0L; 2006-2008 IC Corporation 1300 FBC 7.6L; 2005-2007 IC Corporation 1652 SC 6.0L;
This Fuel Injection Control Module Fits For the Following Vehicles: 2005-2006 IC Corporation 3000 Chassis 6.0L; 2006 IC Corporation 3000 IC 6.0L; 2007 IC Corporation 3200 6.0L; 2005 IC Corporation 3300 Chassis 6.0L/ 7.6L; 1900 Del Del29 Del32 Del35 Customers can find FICM you need accurately according to the replace part number: 904-229, 904-229, 3C3Z12B599AARM, 4C3Z12B599AARM, 4C3Z12B599ABRM, 4C3Z12B599BARM, 1845117C2, 1845117C6, 5010121R94, 4C3Z 12B599 ABRM, 4C3Z 12B599 BARM & more.
This replacement is just what your need to get your vehicle running great again! If you've got a P0611 code and low voltage to your injectors, this could solve the problem. Note: For 2004 model year, Ford revised the design of the FICM. Please remove inspection cover to confirm style. This is only correct for 4-screw (4 Pins) style (Late 04) units. This unit does not need to be reprogrammed after installation, but it is recommended to confirm your vehicle has an up-to-date flash from Ford.